IP Video System Design Tool
Help Manual
×
Menu
Index

Camera Parameters

Camera Parameters
1

Installation height

1. Installation height
You can change camera installation height by 3 ways:
  • choosing the necessary value from drop-down list
  • typing the required value in the field
  • using blue arrows
2

Manufacturer and model

2. Manufacturer and model
If you know the manufacturer and model of the camera you need, you can choose it here using the drop down menus for both.
3

Camera base

3. Camera base
You can choose a camera model from our database. Currently we have more than 2000 camera models in the database.
You can also add your own model.
4

Sensor format and Aspect ratio

4. Sensor format and Aspect ratio
Set the required sensor format and aspect ratio.
5

Resolution

5. Resolution
Set the desired camera resolution. Higher the resolution, higher is the pixel density, and you get better image quality.
6

Lens focal length

6. Lens focal length
You can correct focal length by using +, - buttons or inputting the desired value numerically.
Changing field of view width and field of view height or camera angles, will also alter the focal length.
7

Tilt angle

7. Tilt angle
Camera tilt is calculated based on the distance from camera to the target and field of view height.
8

Man's face and license plate

8. Man's face and license plate
The quality of the image gives an idea about the clarity of objects at the farthest point of field of view.
If you right click on this image, you will get this menu:
Change target: you can change test models (man and woman) to new.
3D face: change 2D image to 3D modulation.
Made with help of Dr.Explain